Excessive moisture in your yard can cause damage to both the yard itself and your home. It not only makes it difficult to grow grass and maintain landscape, it can quickly lead to foundation problems and a wet, musty basement. The good news is that Armtec has some simple and economical solutions for home drainage problems.

The WIP line of self-adhering roofing underlayments is designed to provide enhanced protection for single-ply systems when applied around roof areas such as eaves, ridges, valleys and skylights. Offering superior resistance to water and ice damming, extreme temperatures and other harsh weather conditions.

EZ-Flash is a 20-mil self-adhering flashing that is designed to provide easy application and superior protection from moisture and air penetration. EZ-Flash can be used to flash around window and door openings, over wall sheathing joints, as well as many other flashing applications.

Living up to today’s demands for energy efficiency is about meeting or exceeding modern energy codes. DuPont building envelope solutions are designed to control air flow, eliminate leaks, and provide your building with the resilience to contend with the forces of nature.

Products such as DuPont™ FlexWrap™ EZ and LiquidArmor™ Flashing and Sealant improve the weather resistive barrier in your building, providing air and water holdout.

EcoStar Glacier Guard is a self adhering sheet membrane used for protecting roof substrates against moisture penetration from wind driven rain and water backup caused by ice dams. It is available in smooth surface, high temp smooth surface and granular surface.

ESP Low-E™ House-Wrap does more than simply stop drafts. A pure aluminum facing is heat bonded to one or both sides of closed cell polyethylene foam, then the product is pin perforated. This results in a house-wrap that acts not only as a superior air infiltration barrier, effectively sealing up cracks or gaps in the external sheathing, but it also adds an insulation to the exterior of the home blocking up to 97% of radiant heat. This results in better year round efficiency and comfort levels.

Help prevent wind-driven rain from leaking through the roof deck, or melting ice and snow (caused by ice dams in harsh winter climates) from leaking into property’s interior. Choose from a variety of products including: StormGuard®, StormFlash™, WeatherWatch®, UnderRoof™ 2, and WeatherWatch® XT.

Superior quality roof deck protection prevents wind-driven rain from infiltrating under your shingles, provides an extra layer of protection between your shingles and your roof deck, lays flatter and will not buckle when installed.

Choose from a variety of products including: Deck-Armor™ Premium Breathable Roof Deck Protection, Shingle-Mate® Roof Deck Protection, and VersaShield® Fire Resistant Roof Deck Protection

DensGlass® Sheathing disrupted the way commercial buildings are designed over 30 years ago, and now DensElement® Barrier System continues that legacy of innovation by integrating 3 products in one: gypsum sheathing, water-resistive barrier and air barrier. AquaKor™ Technology creates the WRB-AB within by integrating the fiberglass mat and gypsum core to form a monolithic, hydrophobic surface that blocks bulk water but allows vapor to pass through, eliminating the need for a separate WRB-AB.

The ForceField® air and water barrier system consists of engineered wood sheathing panels which are laminated with a proprietary air and water barrier. The panels install just like standard OSB or plywood sheathing. Once installed and taped with ForceField seam tape, the system creates an integrated air and water barrier for your structure, eliminating the need for separate house wrap. When you do away with this step it helps save you time and labor costs, which ultimately lowers your total installed costs. The ForceField system is ideal for residential or light commercial construction.

 

Henry® Company is a leading innovator of Building Envelope Systems® and understands the systems involved to ensure superior building performance.

This next generation vapor permeable air barrier picks up where traditional polymeric wraps leave off. Ideal for wood frame construction, Henry Blueskin® VP100 is a fully adhered, peel-n-stick system that eliminates air leakage while functioning as a water-resistant barrier and rain barrier.

Effective protection begins and ends with Henry, your single source for waterproofing. Henry waterproofing systems combine the right materials that act together to prevent water infiltration through the Building Envelope.

Hohmann & Barnard, Inc. serves both the Commercial/Institutional markets and the Residential market as the leading developer and distributor of reinforcement, anchoring and air barrier systems for masonry. These include:

• Reinforcement and Anchoring Systems
• Flashing and Waterproofing Systems
• Mortar Dropping Collection and Ventilation Systems

Hohmann & Barnard, Inc. is also committed to the green building industry by offering a complete line of environmentally friendly products for the construction of sustainable masonry structures. These include:

• Carbon Steel Reinforcement and Masonry Wire Ties made from 99% post industrial re-cycled material.
• VOC and HAP Free Green Flashing and Air Barrier Products
• Mortar Net®
• Re-bonded Rubber and Cork Products

HardieWrap weather barrier provides a balance of water resistance and breathability, reducing water intrusion while allowing water vapor from inside your home to escape. This keeps the area within your walls dry.

HardieWrap Pro-Flashing is a butyl rubber self-adhesive designed to peel and stick around windows and doors to prevent water and air intrusion. It also self-seals around fasteners.

HardieWrap Flex Flashing is designed to easily stretch and seal around custom shapes — including windows and doorsills — to prevent water and air from entering the building.

HardieWrap Seam Tape is designed to seal vertical and horizontal seams and small holes in the weather barrier to prevent air and water infiltration.

JM Ice and Water Guard™ is a self-adhering membrane composed of rubberized asphalt roofing sheet with a strong inorganic glass mat for reinforcement. SureGrip™ is used under shingles, slate, shakes and tiles. It prevents leaks and damage to decking and internal structures from wind blown rain and water backup due to ice dams. SureGrip™ is also used as a vapor barrier for roofs, walls and floors.

Karnak membranes are ideal for use with cold application cements and coatings, and being of high flexibility, conforms to all contours as required in general roofing and waterproofing maintenance.

GreenGuard's business is to help you build the most protected and durable walls possible. Their residential line is filled with products that help block water and air infiltration and add insulating power.

Building wraps are an essential part of water managed walls. GreenGuard offers a full line of specialized building wrapss and drainage mats.

Blocking water intrusion around windows and doors is a must for preventing wall damage. Properly installed GreenGuard® Flashings help deflect water that would otherwise enter the wall.

Lamb & Ritchie roof flashing is a form of weatherproofing that shields protruding objects from a roof (such as chimneys and vents) against water.

Flashings are available in aluminum and copper.

A housewrap that does more than simply stop drafts! A pure aluminum facing is heat bonded to one or both sides of closed cell polyethylene foam, then the product is pin perforated. This results in a house-wrap that acts not only as a superior air infiltration barrier, effectively sealing up cracks or gaps in the external sheathing, but it also adds an insulation to the exterior of the home blocking up to 97% of radiant heat. This results in better year round efficiency and comfort levels.

Moisture penetration is one of the most critical challenges facing concrete structures. Interior or exterior, above or below grade, unprotected structures can suffer from water-induced damage, including deterioration and corrosion caused by alkalis, salts, acids and mold. Liquid-applied high-performance membranes and cementitious coatings provide a seamless barrier to seal walls and penetrations against the most damaging conditions. Protection can be enhanced further through the use of admixtures that facilitate low concrete permeability, such as integral crystalline capillary waterproofing admixtures.

An important consideration in the construction of industrial buildings, commercial or retail properties, and private residences, is selecting correct and effective waterproofing and weather barriers for the structure. Meeting the challenge to develop products designed for these tasks is MFM Building Products Corporation. MFM has focused on developing, testing, and producing specialty sealing and weatherization materials for over 40 years.

Protecting you from the harsh elements of mother nature, HomeGuard housewrap excels in air and water resistance, moisture vapor permeability and durability. HomeGuard housewrap is an engineered, woven, polyolefin material designed for use as a secondary weather resistive barrier.

The strong woven fabric ensures jobsite durability, even in the harshest conditions. HomeGuard’s micro-perforations allow damaging moisture as a vapor to escape while shedding bulk water.

Roofmaster® remains dedicated to the commercial, residential and technical product aspects of the roofing industry, and has become the world's largest manufacturer and wholesale distributor of quality commercial roofing equipment, tools, accessories and related supplies.